lu Acoustic panel, straight element 1.2 x 0.6 m

The Alu Acoustic Panel – a straight element with curves  – is a high-quality product  for installing underfloor heating pipes in drywall construction. It is designed  for pipes with diameters of 16 and 17 mm.  The panel is made of wood fiber and aluminum foil. The physical properties of these materials allow for optimal thermal and acoustic insulation and prevent vibration transmission.  The aluminum foil veneer  acts as a heat sink,  absorbing heat from the pipes and distributing it across the panel's surface. 

The torsion element  allows you to avoid obstacles, structural offsets, and columns when installing underfloor heating in drywall.  The panels are available in a variety of configurations , allowing you to tailor them to the individual needs of your project. The Alu Acoustic panel with the torsion element can be combined with  the Alu Acoustic panel  – a straight element  with a double arc , making drywall installation quick and hassle-free. 

Alu Acoustic plate - torsion element - technical data:

 material: wood fiber (covered with aluminum foil)

 fits pipes with a diameter of: 16 and 17 mm

 length: 120 cm   width: 60 cm   thickness 2.4 cm

 waga netto: 4,6 kg

 distance between grooves: 15 cm

 density: 250-270 kg/m3

 declared thermal conductivity coefficient λ [W/mK]: 0.050

 specific heat capacity c [J/kgK]: 2100

 compressive strength [kPa] >100 (according to PN EN 826 the marked value is 250-300 [kPa])

 static bending strength: >1.0 [N/mm2]

 sound absorption coefficient: 0.10 for frequencies 250-500 Hz; 0.30 for frequencies 1000 - 2000 Hz

 water vapor diffusion resistance coefficient μ: 10 for dry conditions; 5 for wet conditions

 swelling after 24 hours of soaking in water: ⩽10%

 fire classification according to PN EN13501-1:E

Advantages of the board:

 quick and easy assembly

 low height

 good substrate stability

 does not require the use of a concrete screed (dry construction system)

 can be combined with the Alu Acoustic plate - a straight element with a double arch

Dry underfloor heating - Alu Acoustic System:

1. Edge tape

2. Acoustic Alu plate - straight element with double arch or Acoustic Alu plate - torsional element

3. Underfloor heating pipe

4. Foundation

5. Target floor

Application of Alu Acoustic panels: 

 residential construction

 public buildings

 for both wooden and concrete ceilings.