Skip to main content

Heat Master Floor

Efficient heating
Easy online shopping
Energy-saving technology

Heat Master Floor

Home
Store
Contact
Frequently asked questions
Account
0 Wishlist
0 Cart

Explore our products

ALU Standard EPS300 25mm - element prosty z podwójnym łukiem

€20.00

ander Alu Standard EPS 300 boards are used as a supporting element for underfloor heating pipes in drywall construction. The physical properties of EPS 300 polystyrene ensure that the product provides optimal thermal and acoustic insulation for the system . The aluminum foil veneer acts as a heat sink, absorbing heat from the pipe's sidewall and distributing it evenly across the board's surface. The straight element is used for running pipes straight and for meandering them along the building's walls.

+ See details

Alu Acoustic panel, double arch, 1.2 x 0.6 m

€25.00

lu Acoustic panel, straight element 1.2 x 0.6 m

The Alu Acoustic Panel – a straight element with curves – is a high-quality product for installing underfloor heating pipes in drywall construction. It is designed for pipes with diameters of 16 and 17 mm. The panel is made of wood fiber and aluminum foil. The physical properties of these materials allow for optimal thermal and acoustic insulation and prevent vibration transmission. The aluminum foil veneer acts as a heat sink, absorbing heat from the pipes and distributing it across the panel's surface.

The torsion element allows you to avoid obstacles, structural offsets, and columns when installing underfloor heating in drywall. The panels are available in a variety of configurations , allowing you to tailor them to the individual needs of your project. The Alu Acoustic panel with the torsion element can be combined with the Alu Acoustic panel – a straight element with a double arc , making drywall installation quick and hassle-free.

Alu Acoustic plate - torsion element - technical data:

material: wood fiber (covered with aluminum foil)

fits pipes with a diameter of: 16 and 17 mm

length: 120 cm width: 60 cm thickness 2.4 cm

waga netto: 4,6 kg

distance between grooves: 15 cm

density: 250-270 kg/m3

declared thermal conductivity coefficient λ [W/mK]: 0.050

specific heat capacity c [J/kgK]: 2100

compressive strength [kPa] >100 (according to PN EN 826 the marked value is 250-300 [kPa])

static bending strength: >1.0 [N/mm2]

sound absorption coefficient: 0.10 for frequencies 250-500 Hz; 0.30 for frequencies 1000 - 2000 Hz

water vapor diffusion resistance coefficient μ: 10 for dry conditions; 5 for wet conditions

swelling after 24 hours of soaking in water: ⩽10%

fire classification according to PN EN13501-1:E

Advantages of the board:

quick and easy assembly

low height

good substrate stability

does not require the use of a concrete screed (dry construction system)

can be combined with the Alu Acoustic plate - a straight element with a double arch

Dry underfloor heating - Alu Acoustic System:

1. Edge tape

2. Acoustic Alu plate - straight element with double arch or Acoustic Alu plate - torsional element

3. Underfloor heating pipe

4. Foundation

5. Target floor

Application of Alu Acoustic panels:

residential construction

public buildings

for both wooden and concrete ceilings.

+ See details

Multilayer Pipe 16mm X 500m

€400.00

Our Plain Multi Layer pipe is WRAS approved and available in various sizes and dimensions. PF Press multilayer composite pipe is made up of 5 layers that comprise of an inner and outer PERT layer, a central aluminium layer, bonded together by two adhesive layers. The aluminium layer is butt welded to give a complete oxygen barrier seal.

+ See details

Standard ALU EPS300 plate 25 mm - torsion element

€30.00

Standard Alu EPS300 plate 25mm torsion element

Type of heating: underfloor heating in dry construction
System: dry underfloor heating system - dry floor

The Sander Alu Standard EPS 300 board is a supporting element for underfloor heating pipes in drywall construction. The physical properties of EPS 300 polystyrene foam allow the product to thermally and acoustically insulate the system . The aluminum foil veneer acts as a heat sink , absorbing heat from the pipe's sidewall and distributing it evenly across the board's surface. The torsion element facilitates the avoidance of structural faults and obstacles when routing underfloor heating pipes.

+ See details

© 2025 - 2026 Heat Master Floor